JET 354173 Use and Care Manual

Operating Instructions and Parts Manual 17" Floor Drill Press Model: JDP-17DX WALTER MEIER (Manufacturing) Inc. 427 New Sanford Road LaVe

10Electrical Grounding Instructions In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to

11Adjustments Removing the Chuck and Arbor Referring to Figure 7: 1. Unplug machine from the power source. 2. Raise the table until it is about sev

12Return Spring Adjustment The return spring is located behind the left downfeed handle hub. It is adjusted at the factory and should

13 Laser Adjustment The Laser Assembly has been installed and preset at the factory. It should, however, be checked and adjustments made, if necessar

14 Laser Assembly Removal/InstallationThe JDP-17DX drill press can be used as a mortiser when fitted with a mortiser adapter (not included). When use

15 Operating Controls Refer to Figure 15: Start Switch (A) – Press to start machine Stop Switch (B) – Press to stop machine Light Switch (C) – Turns

16 Troubleshooting Trouble Probable Cause Remedy Drill press will not start. 1. Drill press unplugged from wall or motor. 2. Fuse blown or circuit

17 Parts Ordering Replacement Parts To order parts or reach our service department, call 1-800-274-6848 Monday through Friday (see our website for bu

18 Parts List Index No Part No Description Size Qty 41 ... 10661102 ...Seat ...

19 Parts List Index No Part No Description Size Qty 95 ... JDP17DX-095 ...Rubber Seal ...

2Warranty and Service JET, Wilton and Powermatic warrants every product they sell against manufacturers’ defects. If one of our tools needs service o

20 Parts List Index No Part No Description Size Qty 149 ... JDP17DX-149 ...Locking Cable Tie ...

21 Assembly Drawing

22 Wiring Diagram

23 Notes

24 WALTER MEIER (Manufacturing) Inc. 427 New Sanford Road LaVergne, Tennessee 37086 Phone: 800-274-6848 www.jettto

3Table of Contents Warranty and Service ...

4 Warnings 1. Read and understand the entire owners' manual before attempting assembly or operation. 2. Read and understand the warnings poste

5 23. Give your work undivided attention. Looking around, carrying on a conversation and “horse-play” are careless acts that can result in serious i

6Introduction This manual is provided by Walter Meier (Manufacturing) Inc., covering the safe operation and maintenance procedures for the JET JDP-17

7Unpacking Separate all parts from the packing material. Check each part against the Contents of the Shipping Container and make certain that all ite

8Assembly Base and Column Assembly Referring to Figure 1: 1. Place the base (A) on a level floor. 2. Place the column assembly (B) on the base (A) an

9Mounting the Head 1. With the aid of a second person, carefully lift the head onto the column top (Figure 3). The head assembly is heavy! To avoi