JET 708658K Use and Care Manual download pdf (Page 11)

Filter Bag Kit Assembl

If you purchased a DC-1100VX-BK, or DC-1100VX-

5M Dust Collector, this section describes the assembly

and installation of the contents of the Filter Bag Kit

(SN 708636F or 708636MF).

Filter Bag Installation

Referring to Figure 8:

1. Place the hanger (A) on the hanger bracket (B).

2. Slide the filter bag loop (C) over the hanger hook.

3. Feed the retainer strap (D) through the loops on

the filter bag (E) and fasten to the collector

housing (F).

Collector Bag Installation (30 Micron Kit)

Referring to Figure 9:

4. Insert the ring of the collector bag (A) at an angle

into the housing (B) through the opening at the

bottom. Pull down on the bag to make sure it

“seats” in the housing.

5. Position the plastic window in front so that you can

easily see when the collector bag is full.

Collector Bag Installation (5 Micron Kit)

The 5-Micron Filter Bag Kit includes clear plastic

collector bags. Refer to Figures 11 and 12 on the next

page, along with the accompanying instructions, to

install these.

After completing the filter bag and collector bag

installation, proceed to Electrical Connections.

Figure 8

Figure 9

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

No comments

JET 708658K Use and Care Manual Page 11