JET 708411 Use and Care Manual download pdf (Page 8)

8

Unpacking

Contents of the Shipping Container

1 Sander

3 Table Insert Rings

2 Spindle Wrenches

1 2mm Hex Wrench

10 Removable Spindles

1/4” x 6” Steel and Sanding Sleeve

3/8” x 6” Steel and Sanding Sleeve

1/2” x 6” Steel and Sanding Sleeve

5/8” x 6” Steel and Sanding Sleeve

3/4” x 9” Steel and Sanding Sleeve

1” x 9” Rubber and Sanding Sleeve

1-1/2” x 9” Rubber and Sanding Sleeve

2” x 9” Rubber and Sanding Sleeve

3” x 9” Rubber and Sanding Sleeve

4” x 9” Rubber and Sanding Sleeve

1 Owner's Manual

1 Warranty Card

Tools Required for Assembly and

Adjustments

1 26mm Wrench or Large Adjustable Wrench

1 6mm Hex Wrench

1 Square

Read and understand the

entire contents of this manual before

attempting assembly or operation of the

sander. Failure to comply may cause serious

injury.

1. Remove all contents from shipping carton.

2. Report any damage to your distributor.

3. Do not discard any shipping material until

the sander has been assembled and is

running properly.

4. With help from another person move the

sander off the pallet and into the desired

position.

5. Remove the protective coating found on the

table using a soft rag and a cleaning solvent

that will not damage painted surfaces.

Note: Now is a perfect time to set your sander

up on a mobile base. It will make life easier in

the woodshop. A JET Heavy Duty Universal

Mobile Base is available to fit this sander. JET

also has a variety of Dust Collectors and Air

Filtration Units that will work nicely with your

new sander. Visit waltermeier.com or contact

your JET distributor for options.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Comments to this Manuals

No comments