JET 414700 Use and Care Manual download pdf (Page 4)

3.0 Safety warnings

1. Read and understand the entire owner's manual

before attempting assembly or operation.

2. Read and understand the warnings posted on the

machine and in this manual. Failure to comply

with all of these warnings may cause serious

injury.

3. Replace the warning labels if they become

obscured or removed.

4. Do not use this metal dust collector for other than

its intended use. If used for other purposes,

Walter Meier (Manufacturing) Inc., disclaims any

real or implied warranty and holds itself harmless

from any injury that may result from that use.

5. Some dust created by power sanding, sawing,

grinding, drilling and other construction activities

contain chemicals known to cause cancer, birth

defects or other reproductive harm. Some

examples of these chemicals are:

• Lead from lead based paint.

• Crystalline silica from bricks, cement and

other masonry products.

• Arsenic and chromium from chemically

treated lumber.

Your risk of exposure varies, depending on how

often you do this type of work. To reduce your

exposure to these chemicals, work in a well-

ventilated area and work with approved safety

equipment, such as face or dust masks that are

specifically designed to filter out microscopic

particles.

6. Make certain the switch is in the OFF position

before connecting the machine to the power

supply.

7. Wear approved safety glasses/face shields while

using and cleaning this machine. Everyday

eyeglasses only have impact resistant lenses;

they are not safety glasses.

8. Wear ear protectors (plugs or muffs) during

extended periods of operation.

9. Make certain the machine is properly grounded.

10. Make all machine adjustments or maintenance

with the machine unplugged from the power

source.

11. Remove adjusting keys and wrenches. Form a

habit of checking to see that keys and adjusting

wrenches are removed from the machine before

turning it on.

12. Keep safety guards in place at all times when the

machine is in use. If removed for maintenance

purposes, use extreme caution and replace the

guards immediately after completion of

maintenance.

13. Check damaged parts. Before further use of the

machine, a guard or other part that is damaged

should be carefully checked to determine that it

will operate properly and perform its intended

function. Check for alignment of moving parts,

binding of moving parts, breakage of parts,

mounting and any other conditions that may

affect its operation. A guard or other part that is

damaged should be properly repaired or

replaced.

14. Provide for adequate space surrounding work

area and non-glare, overhead lighting.

15. Keep the floor around the machine clean and free

of scrap material, oil and grease.

16. Keep visitors a safe distance from the work area.

Keep children away.

17. Make your workshop child proof with padlocks,

master switches or by removing starter keys.

18. Give your work undivided attention. Looking

around, carrying on a conversation and “horse-

play” are careless acts that can result in serious

injury.

19. Use the right tool at the correct speed and feed

rate. Do not force a tool or attachment to do a job

for which it was not designed. The right tool will

do the job better and more safely.

20. Use recommended accessories; improper

accessories may be hazardous.

21. Maintain tools with care. Follow instructions for

lubricating and changing accessories.

22. Turn off the machine before cleaning. Use a

brush or compressed air to remove chips or

debris — do not use your hands.

23. Do not stand on the machine. Serious injury

could occur if the machine tips over.

24. Never leave the machine running unattended.

Turn the power off and do not leave the machine

until it comes to a complete stop.

25. Remove loose items and unnecessary work

pieces from the area before starting the machine.

26. Do not use this machine in damp or wet

locations, or expose it to rain. Keep work area

well lighted.

27. Do not use this dust collector to pick up

flammable or combustible liquids, and do not use

it in explosive environments.

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

JET 414700 Use and Care Manual Page 4

Comments to this Manuals

Related products and manuals for Power tools JET 414700