JET 414459 Use and Care Manual download pdf (Page 5)

23. Make your workshop child proof with

padlocks, master switches or by removing

starter keys.

24. Give your work undivided attention. Looking

around, carrying on a conversation and

“horse-play” are careless acts that can result

in serious injury.

25. Maintain a balanced stance at all times so

that you do not fall into the blade or other

moving parts. Do not overreach or use

excessive force to perform any machine

operation.

26. Use the right tool at the correct speed and

feed rate. Do not force a tool or attachment

to do a job for which it was not designed.

The right tool will do the job better and more

safely.

27. Use recommended accessories; improper

accessories may be hazardous.

28. Maintain tools with care. Keep saw blades

sharp and clean for the best and safest

performance. Follow instructions for

lubricating and changing accessories.

29. Turn off the machine before cleaning. Use a

brush or compressed air to remove chips or

debris — do not use your hands.

30. Do not stand on the machine. Serious injury

could occur if the machine tips over.

31. Never leave the machine running

unattended. Turn the power off and do not

leave the machine until it comes to a

complete stop.

32. Remove loose items and unnecessary work

pieces from the area before starting the

machine.

33. Feed work into a blade or cutter against the

direction of rotation of the blade or cutter

only.

34. Don’t use in dangerous environment. Don’t

use power tools in damp or wet location, or

expose them to rain. Keep work area well

lighted.

35. Familiarize yourself with the following safety

notices used in this manual:

This means that if precautions

are not heeded, it may result in minor injury

and/or possible machine damage.

This means that if precautions

are not heeded, it may result in serious injury or

possibly even death.

4.0 About this manual

This manual is provided by Walter Meier (Manufacturing) Inc. covering the safe operation and

maintenance procedures for a JET Model HVBS-7MW Band Saw. This manual contains instructions on

installation, safety precautions, general operating procedures, maintenance instructions and parts

breakdown. Your machine has been designed and constructed to provide years of trouble-free operation

if used in accordance with the instructions as set forth in this document.

If there are questions or comments, please contact your local supplier or Walter Meier. Walter Meier can

also be reached at our web site: www.waltermeier.com.

Retain this manual for future reference. If the machine transfers ownership, the manual should

accompany it.

Read and understand the entire contents of this manual before attempting

assembly or operation! Failure to comply may cause serious injury!

1 2 3 4 5 6 7 8 9 10 ... 23 24

Comments to this Manuals

No comments

JET 414459 Use and Care Manual Page 5

Comments to this Manuals

Related products and manuals for Power tools JET 414459