JET 354401 Use and Care Manual

Operating Instructions and Parts Manual Drill Press Models: J-2500, J-2530, J-2550 J-2530 J-2500

10Chuck and Arbor Removal Referring to Figure 9: 1. Unplug machine from the power source. 2. Raise the table until it is about seven inches below t

11Changing Spindle Speeds A spindle speed and pulley/belt arrangement chart for all models is found on the inside of the pulley cover (D, Fig. 11). R

12 Table Tilt Adjustment The table tilt adjustments are made on the table bracket under the table. To tilt the table (refer to Figures 14 and 15): I

13 Electrical Grounding Instructions This tool must be grounded while in use to protect the operator from electric shock. In the event of a malfunct

14 Troubleshooting Trouble Probable Cause Remedy Drill press will not start. Drill press unplugged from wall, or motor. Check all plug connections.

15 Parts Replacement Parts To order parts or reach our service department, call 1-800-274-6848 Monday through Friday (see our website for business ho

16 Parts List – J-2500, J-2530 Index No. Part No. Description Size Qty 45 ... 10604505 ...Scale Ring ...

17 Parts List – J-2500, J-2530 Index No. Part No. Description Size Qty 128 ... TS-2285162 ...Cr. Re. Truss Hd. Tapping Screw ...

18 Exploded View – J-2500, J-2530

19 Parts List – J-2550 Index No. Part No. Description Size Qty 1 ... J-5627751 ...Base ...

2 Warranty and Service Walter Meier (Manufacturing), Inc., warrants every product it sells. If one of our tools needs service or repair, one of our A

20 Parts List – J-2550 Index No. Part No. Description Size Qty 57 ... 5629131 ...Washer, Rubber ...

21 Parts List – J-2550 Index No. Part No. Description Size Qty 616 ... 5513744 ...Screw, Clamping ...

22 Exploded View – J-2550

23 Wiring Diagram J-2500/J-2530 – 115V J-2500/J-2530 – 230V

24 J-2550 – 115V J-2550 – 230V

3 Table of Contents Warranty and Service...

4 Warnings 1. Read and understand the entire owners manual before attempting assembly or operation. 2. Read and understand the warnings posted on

5 22. Give your work undivided attention. Looking around, carrying on a conversation and “horse-play” are careless acts that can result in serious

6 Introduction The JET 15-Inch 16-Speed Drill Presses and 20-Inch 12-Speed Drill Presses, Models J-2500, J-2530 and J-2550, feature rugged cast iron

7 Shipping Contents Unpack the carton and verify that all parts listed below are included. Main Parts 1 ea Head Assembly 1 ea Table 1 set Column a

8 Assembly Read and understand all assembly instructions before attempting assembly! Failure to comply may cause serious injury! Before Assembly 1.

9 Column Lock Handle Referring to Figure 5: Thread the column lock handle (D) into the table bracket (E). Figure 5 Table Installation Referring